• enEnglish
  • frFrançais (French)
Endura Logo
  • Why Endura
    • About Us
    • Approvals & Listings
  • Product Details
    • XL Large Capacity F.O.G. Management
    • XL Accessories
    • XL Replacement Parts
    • F.O.G. Management 7-50 GPM
    • 7-50 GPM Accessories
    • 7-50 GPM Replacement Parts
    • Plaster Traps
    • Floor Sinks & Grates
  • Resources Center
  • Technical Hub
  • Contact Us
    • Find Us
    • Warranty Registration Card

The standard 3" Endura flow control is an accessible, two piece design that can have application for in-floor installations or where the ability to offset the air intake connection from vertical is preferred. Available in hub x hub, spigot x spigot and FPT threaded formats for flow rates from 25GPM to 50GPM.

Hub Format Flow Control

TWO-PIECE FLOW CONTROL DEVICE, 3" X 3" X 1.5" (HXHXH) PVC (GREY)

Features

• Injection molded in non toxic durable Gray polyvinyl chloride PVC

• Normally used in the drainage portion of the DWV system only

• Maximum service temperature rated at 140F 60C

• Flame Retardant will not support combustion in the presence of an ignition source

• High chemical resistance to nearly all acids alkalis alcohols halogens and other corrosive media

• Use approved PVC primer and solvent cement to make PVC Joints

Submittal Sheets Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3933125A
25gpm Two-Piece Flow Control Device, 3" x 3" x 1.5" (HxHxH) PVC (Grey)
3933135A
35gpm Two-Piece Flow Control Device, 3" x 3" x 1.5" (HxHxH) PVC (Grey)
3933150A
50gpm Two-Piece Flow Control Device, 3" x 3" x 1.5" (HxHxH) PVC (Grey)
Resources

CATALOGUE

OTHER TOOLS

PRICE LIST

Spigot Format Flow Control

TWO-PIECE FLOW CONTROL DEVICE, SPIGOT, 3" X 3" X 1.5" (SXSXS) PVC (GREY)

Features

• Injection molded in non toxic durable Gray polyvinyl chloride PVC

• Normally used in the drainage portion of the DWV system only

• Maximum service temperature rated at 140F 60C

• Flame Retardant will not support combustion in the presence of an ignition source

• High chemical resistance to nearly all acids alkalis alcohols halogens and other corrosive media

Submittal Sheets Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3933125AS
25gpm Two-Piece Flow Control Device, Spigot, 3" x 3" x 1.5" (SxSxS) PVC (Grey)
3933135AS
35gpm Two-Piece Flow Control Device, Spigot, 3" x 3" x 1.5" (SxSxS) PVC (Grey)
3933150AS
50gpm Two-Piece Flow Control Device, Spigot, 3" x 3" x 1.5" (SxSxS) PVC (Grey)
Resources

CATALOGUE

OTHER TOOLS

PRICE LIST

Threaded Format Flow Control

TWO-PIECE FLOW CONTROL DEVICE, THREADED, 3" X 3" X 1.5" (FPT X FPT X FPT) PVC (GREY)

Features

• Injection molded in non toxic durable Gray polyvinyl chloride PVC

• Normally used in the drainage portion of the DWV system only

• Maximum service temperature rated at 140F 60C

• Flame Retardant will not support combustion in the presence of an ignition source

• High chemical resistance to nearly all acids alkalis alcohols halogens and other corrosive media

Submittal Sheets Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3933125AT
25gpm Two-Piece Flow Control Device, Threaded, 3" x 3" x 1.5" (FPT X FPT X FPT) PVC (Grey)
3933135AT
35gpm Two-Piece Flow Control Device, Threaded, 3" x 3" x 1.5" (FPT X FPT X FPT) PVC (Grey)
3933150AT
50gpm Two-Piece Flow Control Device, Threaded, 3" x 3" x 1.5" (FPT X FPT X FPT) PVC (Grey)
Resources

CATALOGUE

OTHER TOOLS

PRICE LIST

Why Endura

  • About Us
  • Approvals & Listings

Other

  • Warranty and Limitation of Liability Reg/Info
  • Terms of Use
  • Privacy
  • Terms and Conditions of Sale
  • AODA
  • Sitemap

Feedback

How could we improve?

Tell us what you want to see.

© 2023 Canplas. All Rights Reserved. WM