English- Français (French)
Hub Adapter
Installed in an ABS DWV piping system to provide a transition to a cast iron Hub. Joints between the cast iron pipe Hub and the plastic spigot should be made using mechanical compression joint. A "Fernco Donut " is recommended.Features
• Injection molded in durable ABS plastic
• ABS pipe to hub connection can be single step ABS solvent cemented
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Domed caps are stronger because there are no sharp corners in the fitting.
• ABS pipe to hub connection can be single step ABS solvent cemented
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Domed caps are stronger because there are no sharp corners in the fitting.
• Normally used in the drainage portion of the DWV system only
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
2" ABS DWV Hub Adapter Cast Iron Adapts DWV Spigot to Cast Iron Hub Spigot X H
3" ABS DWV Hub Adapter Cast Iron Adapts DWV Spigot to Cast Iron Hub Spigot X H
4" ABS DWV Hub Adapter Cast Iron Adapts DWV Spigot to Cast Iron Hub Spigot X H
3" ABS DWV Hub to 4" Cast Iron Pipe Adapter, H X Spigot
Resources
OTHER TOOLS
No Hub Adapter
Installed in an ABS DWV piping system to provide a transition to a cast iron pipe. Joints between the cast iron pipe and the plastic spigot Hub should be made using mechanical compression joint. A "Fernco Coupling " is recommended.Features
• Injection molded in durable ABS plastic
• ABS pipe to hub connection can be single step ABS solvent cemented
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• ABS pipe to hub connection can be single step ABS solvent cemented
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" ABS DWV No Hub Adapter, Cast Iron Adapts No Hub Elastomer Coupling to DWV Spigot H X Spigot
2" ABS DWV No Hub Adapter, Cast Iron to No Hub Elastomer Coupling to DWV Spigot H X Spigot
3" ABS DWV No Hub Adapter, Cast Iron to No Hub Elastomer Coupling to DWV Spigot H X Spigot
4" ABS DWV No Hub Adapter, Cast Iron to No Hub Elastomer Coupling to DWV Spigot H X Spigot
4" X 3" ABS DWV No Hub Adapter, Cast Iron to No Hub Elastomer Coupling to DWV Spigot H X Spigot
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
