English- Français (French)
Fitting Cleanout Adapter with Plug & O-ring SpgxFPT
Installed in an ABS DWV piping system to transition from ABS DWV Hub to a Female National Pipe Thread (FPT). Supplied with a threaded cleanout plug and reusable watertight rubber O-Ring. Can provide a watertight access to the DWV piping system, for cleaning or visual inspection.Features
• Spigot connection can be single step ABS solvent cemented to a 6" ABS DWV Pipe Hub.
• Injection molded in durable ABS plastic and provided with a reusable rubber o-ring
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Working temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Injection molded in durable ABS plastic and provided with a reusable rubber o-ring
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Working temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Normally used in the drainage portion of the DWV system only
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/4" ABS DWV Female Adapter, Female National Pipe Thread Cleanout O-Ring and Plug, Spigot X FPT
1-1/2" ABS DWV Female Adapter, Female National Pipe Thread Cleanout O-Ring and Plug, Spigot X FPT
2" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, FPT X Spigot
3" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, FPT X Spigot
4" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, FPT X Spigot
6" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, FPT X Spigot
Resources
OTHER TOOLS
Two Way Cleanout Fitting HxHxH
Installed in an ABS DWV piping system to provide access to the piping system for inspection and cleaning. A cleanout adapter and plug added for easy access. Normally used in vertical piping above ground. Below ground horizontal piping can be reached using an extension pipe from the center Hub ending in a cleanout adapter and plug above grade.Features
• Hub connection can be single step ABS solvent cemented.
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Can be used to access below ground piping with an extension to above ground
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Can be used to access below ground piping with an extension to above ground
• Teflon tape is recommended for threaded joints
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" ABS DWV Two (2) Way Cleanout Fitting H X H X H
4" ABS DWV Two (2) Way Cleanout Fitting H X H X H
Resources
OTHER TOOLS
Tube End Cleanout with Plug & O-ring HxFPT
Installed in an ABS DWV piping system to transition from ABS DWV Pipe to a Female National Pipe Thread (FPT). Supplied with a threaded cleanout plug and reusable watertight rubber O-Ring to provide access to the piping system. Sometimes called a "tube end" fittingFeatures
• Hub connection can be single step ABS solvent cemented to a 4" Pipe or Spigot connection. Teflon tape is recommended for threaded joints
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Domed caps are stronger because there are no sharp corners in the fitting.
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Domed caps are stronger because there are no sharp corners in the fitting.
• Normally used in the drainage portion of the DWV system only
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, H X FPT
3" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, H X FPT
4" ABS DWV Female Adapter, Female National Pipe Thread (FPT) Cleanout O-Ring and Plug, H X FPT
Resources
OTHER TOOLS
Snap In Cleanout with Countersunk Plug Spg
Installed in a 4" ABS DWV fitting pipe to provide access into the drainage system for inspection and cleaningFeatures
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Teflon tape is recommended for threaded joints
• Hand tighten plus a half turn provides a complete seal
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Teflon tape is recommended for threaded joints
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" ABS DWV "Snap In" Cleanout with Flush Fit Countersink Plug X Spigot
Resources
OTHER TOOLS
Fitting Cleanout Adapter SpgxFPT
Installed in an ABS DWV piping system to transition from ABS DWV Hub to a Female National Pipe Thread (FPT).Features
• Spigot connection can be single step ABS solvent cemented to a 4" ABS DWV Pipe Hub.
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/4" ABS DWV Female Adapter, Female National Pipe Thread (FPT) X Spigot
1-1/2" ABS DWV Female Adapter, Female National Pipe Thread (FPT) X Spigot
2" ABS DWV Female Adapter, Female National Pipe Thread (FPT) X Spigot
4'' ABS DWV Female Adapter, Female National Pipe Thread (FPT) X Spigot
Resources
OTHER TOOLS
Fitting Cleanout Adapter with Plug SpgxFPT
Installed in an ABS DWV piping system to transition from ABS DWV Hub to a Female National Pipe Thread (FPT). Supplied with a threaded cleanout plug. Can provide a watertight access to the DWV piping system, for cleaning or visual inspection.Features
• Spigot connection can be single step ABS solvent cemented to a 4" ABS DWV Pipe Hub.
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Teflon tape is recommended for threaded joints
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Teflon tape is recommended for threaded joints
• Hand tighten plus a half turn provides a complete seal
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" ABS DWV Female Adapter with Cleanout Plug Female National Pipe Thread (FPT) Spigot X FPT
2" ABS DWV Female Adapter with Cleanout Plug Female National Pipe Thread (FPT) Spigot X FPT
3" ABS DWV Female Adapter with Cleanout Plug Female National Pipe Thread (FPT) Spigot X FPT
4'' ABS DWV Female Adapter with Cleanout Plug Female National Pipe Thread (FPT) Spigot X FPT
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
