English- Français (French)
Plastic Recessed Head Cleanout Plug MPT
Installed in an ABS DWV Cleanout to provide a watertight access to the DWV piping system, for cleaning or visual inspection. Can be used with a Cleanout Adapter Fitting Installed in a Wye to provide access.Features
• Self sealing plug , no gasket required
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
• Innovative test membrane from Canplas enables mess-free removal of the test membrane after a water test.
• Simply remove the membrane with a knife after the system is fully drained
• Normally used in the drainage portion of the DWV system only
• Exclusively from Canplas
Submittal Sheets
Resources
• Innovative test membrane from Canplas enables mess-free removal of the test membrane after a water test.
• Simply remove the membrane with a knife after the system is fully drained
• Normally used in the drainage portion of the DWV system only
• Exclusively from Canplas
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
2" PVC DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
3" PVC DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
2-1/2" PVC DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
3-1/2" PVC DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
4-1/2" PVC DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
Cleanout Plug with O-ring MPT
Installed in an ABS DWV Cleanout to provide a watertight access to the DWV piping system, for cleaning or visual inspection. Can be used with a Cleanout Adapter Fitting Installed in a Wye to provide access.Features
• Threaded plug provided with a reuseable watertight Rubber O-Ring
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/4" ABS DWV Cleanout Plug with Rubber O-Ring Male National Pipe Thread (MPT)
1-1/2" ABS DWV Cleanout Plug with Rubber O-Ring Male National Pipe Thread (MPT)
2" ABS DWV Cleanout Plug with Rubber O-Ring Male National Pipe Thread (MPT)
3" ABS DWV Cleanout Plug with Rubber O-Ring Male National Pipe Thread (MPT)
4" ABS DWV Cleanout Plug with Rubber O-Ring Male National Pipe Thread (MPT)
6" ABS DWV Cleanout Plug with Rubber O-Ring Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
Cleanout Plug MPT
Installed in an ABS DWV Cleanout to provide a watertight access to the DWV piping system, for cleaning or visual inspection. Can be used with a Cleanout Adapter Fitting Installed in a Wye to provide access.Features
• Self sealing plug , no gasket required
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/4" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
1-1/2" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
2" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
3" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
4" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
2-1/2" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
3-1/2" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
6" ABS DWV Cleanout Plug Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
Countersunk Plug MPT
Installed in an ABS DWV Cleanout to provide a flush fitting watertight access to the DWV piping system, for cleaning or visual inspection.Features
• Self sealing plug , no gasket required
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
2" ABS DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
3" ABS DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
4" ABS DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
6" ABS DWV Recessed Head Cleanout Plug Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
