English- Français (French)
Closet Flange for Concrete & Tile Floors
Installed in a 3" ABS DWV roughed-in Hub, concrete is then poured to the required level and when set, the adapter Hub cut flush with the floor. The closet flange provided is then solvent cemented inside the adapter Hub. A molded Test Plate to prevent debris entering and allow the hydrostatic leak test. The test plate can then be removed.Features
• Hub and spigot connections can be single step ABS solvent cemented.
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Reduces installation time and the need for extra fittings
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Reduces installation time and the need for extra fittings
• eliminates the need to cut concrete during installation of the closet flange
• For use on slab on grade closet flange installations
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Submittal Sheets
Resources
• For use on slab on grade closet flange installations
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" ABS DWV Closet Flange Adapter for Concrete, Tiled Floors. Adapter Kit with Test Plate X 3" H
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic Hub End with Gussets
Installed in an ABS DWV piping system to provide installation of a water closet to a 4" ABS DWV Drainage Pipe. Gussets are provided to add extra strength to the flange.Features
• Injection molded in durable ABS plastic
• ABS pipe to hub connection can be single step ABS solvent cemented
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• ABS pipe to hub connection can be single step ABS solvent cemented
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" ABS DWV Closet Flange One Piece Hub End with Gussets
4" X 3" ABS DWV Closet Flange One Piece 3" H with Gussets
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic with Molded Test Plate
Installed in an 3" ABS DWV piping system to provide installation of a water closet to the Pipe. A molded Test Plate to prevent debris entering and allow the hydrostatic leak test to be carried out. Then test plate to be removed.Features
• Hub connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" ABS DWV Closet Flange with Molded Test Plate X 3" DWV Hub End
4" X 3" ABS DWV Closet Flange with a molded Test Plate One Piece X 3" H with Gussets
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic - Hub
Installed in an ABS DWV piping system to provide installation of a water closet to a 3" or 4" ABS DWV Pipe. The Flange can be solvent cemented inside a 4" ABS DWV pipe or outside a 3" ABS DWV pipe.Features
• Spigot or Hub connection can be single step ABS solvent cemented.
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" ABS DWV Closet Flange Hub X Flush Fit
4" X 3" ABS DWV One Piece Closet Flange 4" or 3" Hub or Spigot
4" X 3" ABS DWV One Piece Closet Flange with a Molded Test Plate for 4" or 3" DWV Pipe Hub or Spigot
4" X 3" ABS DWV One Piece Closet Flange without Pipe Stop 4" or 3" Hub or Spigot
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic
Installed in an ABS DWV piping system to provide installation of a water closet to the Pipe. Slot location for bolts are fixed at 3 and 9 o'clock.Features
• Hub connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" ABS DWV One Piece Closet Flange with fixed slot locations X 3" Hub
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic Spg with Slot
Installed in an ABS DWV piping system to provide installation of a water closet to the Pipe Hub. Slot location for bolts are fixed at 3 and 9 o'clock.Features
• Spigot connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Friction fitted to DWV Pipe sizes
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" ABS DWV One Piece Closet Flange with fixed slot locations X 3" Spigot
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
