English- Français (French)
Coupling HxH
Installed in an ABS DWV piping system to join two pieces of ABS DWV Pipe or provide a Hub connection at the end of the pipe.Features
• Hub connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Working temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Working temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Normally used in the drainage portion of the DWV system only
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/4" ABS DWV Coupling H X H
1-1/2" ABS DWV Coupling H X H
2" ABS DWV Coupling H X H
3" ABS DWV Coupling H X H
4" ABS DWV Coupling H X H
6" ABS DWV Coupling H X H
Resources
OTHER TOOLS
Repair Coupling (No Pipe Stop) HxH
Used as a repair coupling to insert a new piece of ABS DWV pipe in a broken installation. The fitting has no pipe stop therefore it can slide unto existing pipe to allow the new pipe to butt up to the old pipe and then slide back over the joint.Features
• Repair couplings can be single step ABS solvent cemented to pipe
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• ABS spigot to hub connection can be single step ABS solvent cemented
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Submittal Sheets
Resources
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" ABS DWV Repair Coupling Without a Pipe Stop H X H
2" ABS DWV Repair Coupling Without a Pipe Stop H X H
3" ABS DWV Repair Coupling Without a Pipe Stop H X H
4" ABS DWV Repair Coupling Without a Pipe Stop H X H
Resources
OTHER TOOLS
Reducer Coupling
Installed in an ABS DWV piping system to join a pipe or spigot to a smaller pipe or spigot.Features
• Hub connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" X 1-1/4"ABS DWV Reduced Coupling H X H
2" X 1-1/4" ABS DWV Reduced Coupling H X H
2" X 1-1/2" ABS DWV Reduced Coupling H X H
3" X 1-1/2" ABS DWV Reduced Coupling H X H
3" X 2" ABS DWV Reduced Coupling H X H
4" X 2" ABS DWV Reduced Coupling H X H
4" X 3" ABS DWV Reduced Coupling H X H
4" X 1-1/2" ABS DWV Reduced Coupling H X H
3" X 1-1/4" ABS DWV Reduced Coupling H X H
6" X 4" ABS DWV Reduced Coupling H X H
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
