Installed in an ABS DWV piping system to allow for a 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections. • Injection molded in durable ABS plastic. • For use in both the drainage and venting sections of the plumbing installation. • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F). • Injection molded in durable ABS plastic.
• Normally used in the drainage portion of the DWV system only. • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring.
Installed in an ABS DWV piping system to allow for a long turn 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Teflon tape is recommended for threaded joints
• Hand tighten plus a half turn provides a complete seal
Installed in an ABS DWV piping system to allow for a 90 degree change of direction from a P-Trap U Bend from vertical to horizontal.
Features
• Hub connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Normally used in the drainage portion of the DWV system only • Union joint is self sealing, no teflon tape required
• Normally used in the drainage portion of the DWV system only • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to allow for a 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections. • Injection molded in durable ABS plastic. • For use in both the drainage and venting sections of the plumbing installation. • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F). • Injection molded in durable ABS plastic.
• Normally used in the drainage portion of the DWV system only. • Pour emploi à la fois dans la partie évacuation et dans la partie ventilation d'une installation de plomberie. • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring.
Installed in an ABS DWV piping system to allow for a 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical.
Features
• Hub connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Normally used in the Vent portion of the DWV system only • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to allow for a 90 degree change of direction from vertical to horizontal and horizontal to vertical. Also provided with a Hub mounted in the low heel of the bend to accept an ABS DWV pipe or spigot.
Features
• Hub connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • For use in both the drainage and venting sections of the plumbing installation • Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
Installed in an ABS DWV piping system to allow for a 90 degree change of direction from vertical to horizontal and horizontal to vertical. Also provided with a Hub mounted in the low heel of the bend to accept an ABS DWV pipe or spigot.
Features
• Hub connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • For use in both the drainage and venting sections of the plumbing installation • Compact design, eliminates the need to stack two (2) 3" X 1-1/2" tees on top of each other, avoiding complicated installations
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in a 3" ABS DWV piping system to allow for a 90 degree change of direction from vertical to horizontal and horizontal to vertical. Also provided with a side inlet Hub to accept an ABS DWV pipe or spigot.
Features
• Hub connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • For use in both the drainage and venting sections of the plumbing installation • Compact design, eliminates the need to stack two (2) 3" X 1-1/2" tees on top of each other, avoiding complicated installations
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to allow for a long turn 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a spigot termination.
Features
• Hub and spigot connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system when an extra long turn 90 degree change of direction is needed from vertical to horizontal, horizontal to horizontal and horizontal to vertical.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Domed caps are stronger because there are no sharp corners in the fitting.
• Normally used in the drainage portion of the DWV system only • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed at the mounting location of an ABS DWV Closet Flange to transition from the Closet Flange Installed inside the Hub of the reducer bend to the Hub that connects to the ABS DWV drainage system.
Features
• Hub connections can be single step ABS solvent cemented • Injection molded in durable ABS plastic • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Normally used in the drainage portion of the DWV system only • Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Installed in an ABS DWV piping system to provide 1/6 or 60 Degree change in direction from vertical to horizontal or horizontal to horizontal.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to provide a long turn 1/6 or 60 Degree change in direction from vertical to horizontal or horizontal to horizontal.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Teflon tape is recommended for threaded joints
Installed in an ABS DWV piping system to allow for a 1/6 or 60 Degree change of direction from vertical to horizontal or horizontal to horizontal. A conversion fitting that changes the piping system from a Hub to a Spigot or a Spigot to a Hub termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to provide a tight or short 45 degree change in direction where space is a concern. From vertical to horizontal, horizontal to horizontal and horizontal to vertical. Also known as a 1/8 bend or elbow.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections. • Injection molded in durable ABS plastic. • For use in both the drainage and venting sections of the plumbing installation. • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F). • Injection molded in durable ABS plastic.
• Normally used in the drainage portion of the DWV system only. • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring.
Installed in an ABS DWV piping system to provide a long turn 45 degree change in direction . From vertical to horizontal, horizontal to horizontal and horizontal to vertical. Also known as a 1/8 long turn bend or elbow.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to allow for a short turn 45 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination or a spigot to a Hub termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Teflon tape is recommended for threaded joints
• Hand tighten cleanout plug plus a half turn provides a complete seal • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to allow for a long turn 45 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination or a spigot to a Hub termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Installed in an ABS DWV piping system to allow for a short turn 45 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination or a spigot to a Hub termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections. • Injection molded in durable ABS plastic. • For use in both the drainage and venting sections of the plumbing installation. • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F). • Injection molded in durable ABS plastic.
• Normally used in the drainage portion of the DWV system only. • Teflon tape is recommended for threaded joints. • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring.
Installed in an ABS DWV piping system to provide 1/16 or 22-1/2 Degree change in direction from vertical to horizontal or horizontal to horizontal.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
Installed in an ABS DWV piping system to allow for a 1/16 or 22-1/2 Degree change of direction from vertical to horizontal or horizontal to horizontal. A conversion fitting that changes the piping system from a Hub to a Spigot or a Spigot to a Hub termination.
Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections • Injection molded in durable ABS plastic • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints • Longer 4" Extended spigot reduces the number of fittings needed for thick flooring