Sanitary Tee HxHxH

Installed in a vertical ABS DWV Drainage system to increase the pipe size and allow for a smooth horizontal transition from a horizontal branch line. May also be used in the venting side of the DWV system to attach two vents to a vertical vent stack.

Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Snap in plug is molded on fitting for use during rough in
• Teflon tape is recommended for threaded joints
• Approved for both Vertical and Horizontal Installations
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
102126
2"X 2"X 1-1/2'' ABS DWV Sanitary Tee H X H X H
102126L
2"X 2"X 1-1/2'' ABS DWV Sanitary Tee H X H X H
102127
2"X 1-1/2"X 2'' ABS DWV Sanitary Tee H X H X H
102127L
2"X 1-1/2"X 2'' ABS DWV Sanitary Tee H X H X H
102128
2" X 1-1/2" X 1-1/2" ABS DWV Sanitary Tee H X H X H
102128L
2" X 1-1/2" X 1-1/2" ABS DWV Sanitary Tee H X H X H
102130
3" X 3" X 2" ABS DWV Sanitary Tee H X H X H
102130L
3" X 3" X 2" ABS DWV Sanitary Tee H X H X H
102131
3" X 3" X 1-1/2" ABS DWV Sanitary Tee H X H X H
102131L
3" X 3" X 1-1/2" ABS DWV Sanitary Tee H X H X H
102132
1-1/2" X 1-1/2" X 1-1/4" ABS DWV Sanitary Tee H X H X H Supplied with a Cemented 1-1/4" Bushing
102133
2" X 2" X 1-1/4" ABS DWV Sanitary Tee H X H X H
102134
4" X 4" X 2" ABS DWV Sanitary Tee H X H X H
102136
4" X 4" X 3" ABS DWV Sanitary Tee H X H X H
102144
6" X 6" X 4" ABS DWV Sanitary Tee H X H X H
102150
1-1/4" ABS DWV Sanitary Tee H X H X H
102151
1-1/2" ABS DWV Sanitary Tee H x H X H
102151L
1-1/2" ABS DWV Sanitary Tee H X H X H
102152
2" ABS DWV Sanitary Tee H X H X H
102152L
2" ABS DWV Sanitary Tee H X H X H
102153
3" ABS DWV Sanitary Tee H X H X H
102153L
3" ABS DWV Sanitary Tee H X H X H
102154
4" ABS DWV Sanitary Tee H X H X H
102154L
4" ABS DWV Sanitary Tee H X H X H
102156
6" ABS DWV Sanitary Tee H X H X H
Resources

OTHER TOOLS

Sanitary Tee HxHxFPT

Installed in a vertical ABS DWV piping system to allow for a smooth transition from a Female National Pipe Threaded Hub. This would connect a horizontal Male Threaded Pipe into the vertical drainage line. Can also be used with a Threaded Plug to provide access for cleaning or inspection.

Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Hand tighten plus a half turn provides a complete seal
• Teflon tape is recommended for threaded joints
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
102152-2
2" ABS DWV Sanitary Tee H X H X Female National Pipe Thread (FPT)
Resources

OTHER TOOLS

Sanitary Tee Street SpgxHxH

Installed in an ABS DWV vertical drainage system Hub to allow for a smooth horizontal transition from a horizontal branch line into the drainage pipe and a vertical connection to a vent.

Features
• Hub and spigot connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
• Teflon tape is recommended for threaded joints
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
105126L
2" X 2" X 1-1/2" ABS DWV Street Sanitary Tee Spigot X H X H
105127L
2'' X 1-1/2" X 2" ABS DWV Street Sanitary Tee Spigot X H X H
105128L
2'' X 1-1/2" X 1-1/2" ABS DWV Street Sanitary Tee Spigot X H X H
105130L
3'' X 3" X 2" ABS DWV Street Sanitary Tee Spigot X H X H
105131
3'' X 3" X 1-1/2" ABS DWV Street Sanitary Tee Spigot X H X H
105131L
3'' X 3" X 1-1/2" ABS DWV Street Sanitary Tee Spigot X H X H
105151L
1-1/2'' X 1-1/2" X 1-1/2" ABS DWV Street Sanitary Tee Spigot X H X H
105152L
2'' X 2" X 2" ABS DWV Street Sanitary Tee Spigot X H X H
105153
3'' X 3" X 3" ABS DWV Street Sanitary Tee Spigot X H X H
105153L
3'' X 3" X 3" ABS DWV Street Sanitary Tee Spigot X H X H
105154
4'' X 4" X 4" ABS DWV Street Sanitary Tee Spigot X H X H
105154L
4'' X 4" X 4" ABS DWV Street Sanitary Tee Spigot X H X H
105156
6'' X 6" X 6" ABS DWV Street Sanitary Tee Spigot X H X H
Resources

OTHER TOOLS

Sanitary Tee Left Side Inlet HxHxHxH

Installed in a vertical ABS DWV piping system to allow for a smooth transition from a horizontal branch line to a vertical pipe drainage line.

Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections
• Injection molded in durable ABS plastic
• Service temperature rated at -40 °C (-40 °F) à 80 °C (180 °F)
• For use in both the drainage and venting sections of the plumbing installation
• Used to protect piping from dust and moisture during shipment
• Friction fitted to DWV Pipe sizes
• Longer 4 Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
102146L
3" X 3" X 2" X 2" ABC DWV Sanitary Tee with Left Side Inlet H X H X H X H
102147L
3" X 3" X 3" X 1-1/2" ABS DWV 3" Sanitary Tee with a 1-1/2" Left Hand Side Inlet H X H X H X H
102148L
3" X 3" X 3" X 2" ABS DWV 3" Sanitary Tee with a 2" Left Hand Side Inlet H X H X H X H
102148LRBC
3" X 3" X 2" X 2" ABS DWV 3" Sanitary Tee with a 2" Left & Right Side Inlet H X H X H X H
Resources

OTHER TOOLS

Sanitary Tee Right Side Inlet HxHxHxH

Installed in a vertical ABS DWV piping system to allow for a smooth transition from a horizontal branch line to a vertical pipe drainage line.

Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections
• Injection molded in durable ABS plastic
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• For use in both the drainage and venting sections of the plumbing installation
• Used to protect piping from dust and moisture during shipment
• Friction fitted to DWV Pipe sizes
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
102147R
3" X 3" X 3" X 1-1/2" ABS DWV 3" Sanitary Tee with a 1-1/2" Right Hand Side Inlet H X H X H X H
102148R
3" X 3" X 3" X 2" ABS DWV 3" Sanitary Tee with a 2" Right Hand Side Inlet H X H X H X H
Resources

OTHER TOOLS

Double Sanitary Tee HxHxHxH

Installed in a vertical ABS DWV piping system to allow for a smooth transition from two horizontal branch lines.

Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Injection molded in durable ABS plastic
• Normally used in the drainage portion of the DWV system only
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
102181
3" X 3" X 2" X 2" ABS DWV Double Sanitary Tee, H X H X H X H
102184
3" ABS DWV Double Sanitary Tee H X H X H X H
102185
4" ABS DWV Double Sanitary Tee H X H X H X H
102186
2" ABS DWV Double Sanitary Tee H X H X H X H
102187
1-1/2" ABS DWV Double Sanitary Tee H X H X H X H
102188
2” X 2” X 1 ½” X 1 ½” ABS DWV DBL SAN T H X H X H X H
102189
3" X 3" X 1-1/2" X 1-1/2"ABS DWV Double Sanitary Tee H X H X H X H
102190
4" X 4" X 2" X 2"ABS DWV Double Sanitary Tee H X H X H X H
102191
4" X 4" X 3" X 3"ABS DWV Double Sanitary Tee H X H X H X H
Resources

OTHER TOOLS

Vent Tee

Installed in a ABS DWV piping system within the venting portion only. The tee provides a entrance into a vertical piping Stack from a Horizontal Side Branch

Features
• Hub connections can be single step ABS solvent cemented to pipe or spigot connections
• Injection molded in durable ABS plastic
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Normally used in the drainage portion of the DWV system only
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
102101
1-1/2" ABS DWV Vent Tee H X H X H
102102
2" ABS DWV Vent Tee H X H X H
102103
3" ABS DWV Vent Tee H X H X H
Resources

OTHER TOOLS

Horizontal Twin Tee

Installed in a 3" ABS DWV vertical pipe to accept two (2) 1-1/2" inlets from two (2) opposite directions or side by side. Could be two sinks back to back in different rooms or two sinks side by side in the same room. Can be used to drain or vent.

Features
• Hub connections can be single step ABS solvent cemented.
• Injection molded in durable ABS plastic
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Compact design, eliminates the need to stack two (2) 3" X 1-1/2" tees on top of each other, avoiding complicated installations
• Teflon tape is recommended for threaded joints
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
103750
3" X 1-1/2" X 1-1/2" ABS DWV Horizontal Twin Tee H X H X H
Resources

OTHER TOOLS

Fixture Tee HxHxFPT

Installed in a 2'' ABS DWV piping system used to connect a 2'' horizontal male threaded branch and a 2" vertical line into 2" vertical drain pipe.

Features
• Hub connections can be single step ABS solvent cemented
• For use in both the drainage and venting sections of the plumbing installation
• Injection molded in durable ABS plastic
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Teflon tape is recommended for threaded joints
• Friction fitted to DWV pipe sizes
• Longer 4" Extended spigot reduces the number of fittings needed for thick flooring
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
104130
2'' X 2" X 2" ABS DWV Fixture Tee H X H X Female National Pipe Thread (FPT)
Resources

OTHER TOOLS

We are always here to help.

Do not hesitate to get in touch for any reason.

CONTACT US

Feedback

How could we improve?

Tell us what you want to see.

© 2023 Canplas. All Rights Reserved. WM