Installed in an ABS DWV piping system to provide an increased thickness of the Closet Flange and compensate for raised tiling or flooring around the Closet Flange. Longer water closet bolts would be required during installation,
Features
• Injection molded in durable ABS plastic • Normally used in the drainage portion of the DWV system only • ABS ring to ring connection can be single step ABS solvent cemented • Normally used in the drainage portion of the DWV system only • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• 45 Degree Discharge assists in promoting an increased slope to help waste removal when, using low flow toilets • Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
Installed on a 2" ABS DWV system to provide a connection from a Urinal to a 2" DWV drainage system. The attachment bolts to connect the urinal are set apart at a fixed 4". Kits come individually packaged with installation instructions on header card, plastic urinal flange, foam gasket, stainless steel bolts, washers and nuts.
Features
• Hub connections can be single step ABS solvent cemented. • Injection molded in durable ABS plastic • Normally used in the drainage portion of the DWV system only • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • This complete kit eliminates missing or back-ordered parts
• The flange is reinforced with a cross rib to prevent • Approved for both Vertical and Horizontal Installations
Installed in a 2" PVC DWV system to provide a wall mount connection from a Urinal to a 2" DWV drainage system. The attachment bolts to connect the urinal and are adjustable from 4" to 7". Kits come individually packaged with installation instructions on header card, plastic urinal flange, foam gasket, stainless steel bolts, washers and nuts.
Features
• Hub connections can be single step PVC solvent cemented. • Injection molded in durable PVC plastic • Normally used in the drainage portion of the DWV system only • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • This complete kit eliminates missing or back-ordered parts
• The flange is reinforced with a cross rib to prevent • Approved for both Vertical and Horizontal Installations