English- Français (French)
P Trap Primer Port SpgxSpgxFPT
Installed as part of the PVC White DWV 3"floor drain installation to allow the floor drain p-trap u-bend, to always be filled with water to prevent sewer gas from entering the building. The 1/2" Female National Pipe Thread (FPT) socket provides the connection point for the flexible tubing attached to a Canplas 112321 appliance wye.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC joints
• Teflon tape is recommended for threaded joints
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC joints
• Teflon tape is recommended for threaded joints
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" X 3" PVC DWV WHITE Spigot X 1/2" Female National Pipe Thread (FPT) P-Trap Primer Port
Resources
OTHER TOOLS
PVC Cast Iron Adapter
Installed in an PVC white DWV piping system to transition from PVC white DWV to a Cast Iron male thread.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• For use in both the drainage and venting sections of the plumbing installation
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• For use in both the drainage and venting sections of the plumbing installation
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Teflon tape is recommended for threaded joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" X 3-1/2" PVC WHITE Adapts PVC to Cast Iron Thread Connections H X Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
90° Sink Strainer Adapter
Installed in an PVC DWV piping system from a 1-1/2" Sink drain tail pipe using a 90 Degree Trap Adapter, into a 1-1/2" PVC DWV Pipe. Often used in a Pedestal Sink installation.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Chrome finish components
• Use approved PVC primer and solvent cement to make PVC Joints
Submittal Sheets
Resources
• Chrome finish components
• Use approved PVC primer and solvent cement to make PVC Joints
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV 90 Degree Sink Strainer Adapter H X Sink Strainer Adapter Nut and Gasket
1-1/2" PVC WHITE DWV 90 Degree Sink Strainer Adapter H X Sink Strainer Adapter Nut and Gasket
Resources
OTHER TOOLS
Sanitary Tee Trap Adapter HxHxSlip Joint
Normally Installed under a Sink Drain to provide a slip connection from the Drain Tail Pipe to a P-Trap. Also allows for a smooth transition from a horizontal pipe line to a vertical line.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Chrome finish components
• Use approved PVC primer and solvent cement to make PVC Joints
Submittal Sheets
Resources
• Chrome finish components
• Use approved PVC primer and solvent cement to make PVC Joints
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Sanitary Tee Trap Adapter with Washer and Nut H X H X Slip Joint
1-1/2" PVC WHITE DWV Sanitary Tee Trap Adapter with Washer and Nut H X H X Slip Joint
Resources
OTHER TOOLS
Sink Strainer Adapter
Installed in a PVC DWV pipe system beneath a Laundry Tray to connect and transition the threaded tray strainer basket to the drainage system.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC) and using a reliable watertight gasket
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Chrome finish components
• Use approved PVC primer and solvent cement to make PVC Joints
Submittal Sheets
Resources
• Chrome finish components
• Use approved PVC primer and solvent cement to make PVC Joints
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Swivel Tray (Strainer) Adapter with Gasket, Spigot X Female Pipe Thread
Resources
OTHER TOOLS
Sanitary Tee Sink Strainer Adapter
Normally Installed under a Sink Drain Strainer to provide a Gasketed Threaded connection from the strainer basket Tail Pipe to a P-Trap. Also allows for a smooth transition from a horizontal pipe line to a vertical line.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Teflon tape is recommended for threaded joints
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Teflon tape is recommended for threaded joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Approved for both Vertical and Horizontal Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Approved for both Vertical and Horizontal Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC WHITE DWV Sanitary Tee Sink Strainer Adapter H X H X Sink Strainer Adapter Nut and Washer
Resources
OTHER TOOLS
90° Trap Adapter
Installed in an PVC DWV piping system from a Sink drain tail pipe using a 90 Degree Trap Adapter, into a PVC DWV Pipe. Often used in a Pedestal Sink installation.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Approved for both Vertical and Horizontal Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Approved for both Vertical and Horizontal Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" X 1-1/2" PVC DWV 90 Degree Trap Adapter H X Slip Joint Polyethylene Gasket and Nut
1-1/2" X 1-1/2" PVC WHITE DWV 90 Degree Trap Adapter H X Slip Joint Polyethylene Gasket and Nut
1-1/2" X 1-1/4" PVC WHITE DWV 90 Degree Trap Adapter H X Slip Joint Polyethylene Gasket and Nut
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
