Installed in an ABS DWV piping drainage system to provide waste water backflow protection to fixtures and floor drains below the flood plane. Provided with a rubber o-ring, and cap for inside cleaning and inspection.
Features
• Injection molded body in durable ABS plastic and using a reliable watertight o-ring, • Hub connections can be single step ABS solvent cemented • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Normally used in the drainage portion of the DWV system only • Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit
• Hand tighten lid plus a half turn provides a complete seal • Built-in drainage slope 3/4" Fall • Threaded cleanout plug for easy access for cleaning • Can be recessed in-ground with the optional access box. • Exclusively from Canplas
Installed in a PVC Gray DWV piping drainage system to provide waste water backflow protection to fixtures and floor drains below the flood plane. Provided with a rubber o-ring, and cap for inside cleaning and inspection.
Features
• Injection molded in non-toxic durable Gray polyvinyl chloride (PVC) and using a reliable watertight o-ring, • Flame Retardant, will not support combustion in the presence of an ignition source • Maximum Service Temperature Rated at (140F) +60C • Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit • High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints • Hand tighten lid plus a half turn provides a complete seal • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping drainage system to provide waste water backflow protection to fixtures and floor drains, below the flood plane. Provided with a rubber o-ring, and cap for inside cleaning and inspection.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at (140F) +60C • Comes complete with o-ring, • Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit
• Flame Retardant, will not support combustion in the presence of an ignition source • Hand tighten lid plus a half turn provides a complete seal • Use approved PVC primer and solvent cement to make PVC Joints • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Installed in a PVC white sewer piping drainage system to provide waste water backflow protection to fixtures and floor drains, below the flood plane. Provided with a rubber o-ring, and cap for inside cleaning and inspection.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) • Normally used in the drainage portion of the sewer System only • Maximum Service Temperature Rated at (140F) +60C • Comes complete with o-ring, • Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit
• Flame Retardant, will not support combustion in the presence of an ignition source • Hand tighten lid plus a half turn provides a complete seal • Use approved PVC primer and solvent cement to make PVC Joints • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Backwater Valve with 16" Access Sleeve and ABS Lid
Installed in a PVC white DWV piping drainage system to provide waste water backflow protection to fixtures and floor drains below the flood plane. Provided with 16" access sleeve and PVC cover to access a below ground installation for cleaning and inspection.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) and using a reliable watertight o-ring, and PVC lid • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source • Hand tighten lid plus a half turn provides a complete seal
• Use approved PVC primer and solvent cement to make PVC Joints • Hand tighten lid plus a half turn provides a complete seal • Use approved PVC primer and solvent cement to make PVC Joints • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Installed in an ABS DWV horizontal piping drainage system to provide waste water backflow protection to fixtures and floor drains below the flood plane.
Features
• Injection molded body in durable ABS plastic and using a reliable watertight o-ring, . • Hub connections can be single step ABS solvent cemented • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Normally used in the drainage portion of the DWV system only • Hand tighten lid plus a half turn provides a complete seal
• Use approved PVC primer and solvent cement to make PVC Joints • Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source
Installed on a PVC white DWV backwater valve, a cut to size SDR 28 or 35 sewer pipe attaches to the valve adapter and extends access to the valve from ground level. A threaded plug seals the valve and a provided cap covers the sleeve entrance.
Features
• Injection molded in non toxic durable white polyvinyl chloride PVC • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at 140F 60C • Flame Retardant will not support combustion in the presence of an ignition source • Hand tighten lid plus a half turn provides a complete seal
• Use approved PVC primer and solvent cement to make PVC Joints • Hand tighten lid plus a half turn provides a complete seal • Use approved PVC primer and solvent cement to make PVC Joints • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Installed on a PVC white DWV backwater valve, a cut to size SDR 28 or 35 sewer pipe attaches to the valve adapter and extends access to the valve from ground level. A threaded plug seals the valve and a provided cap covers the sleeve entrance.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source • Hand tighten lid plus a half turn provides a complete seal
• Use approved PVC primer and solvent cement to make PVC Joints • Hand tighten lid plus a half turn provides a complete seal • Use approved PVC primer and solvent cement to make PVC Joints • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Custom made for an ABS DWV backwater valve to extend access to ground level. Special pipe size of 7".
Features
• Extruded in durable ABS plastic • Normally used in the drainage portion of the DWV System only • Service Temperature Rated at -40 Degrees C (-40 F) to +80C (180F) • Use approved PVC primer and solvent cement to make PVC joints • Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit
• Hand tighten lid plus a half turn provides a complete seal • Built-in drainage slope 3/4" Fall • Threaded cleanout plug for easy access for cleaning • Can be recessed in-ground with the optional access box. • Exclusively from Canplas
• Injection molded body in durable ABS plastic • Normally used in the drainage portion of the DWV System only • Service Temperature Rated at -40 Degrees C (-40 F) to +80C (180F) • Comes complete with o-ring, • Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit
• Hand tighten lid plus a half turn provides a complete seal • Innovative test membrane from Canplas enables mess-free removal of the test membrane after a water test. • Simply remove the membrane with a knife after the system is fully drained • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Replacement PVC white DWV backwater valve sleeve lid.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source • Flame Retardant, will not support combustion in the presence of an ignition source
• Hand tighten lid plus a half turn provides a complete seal • A Canplas "Great White" product • Corrosion resistant stainless steel strainer grate • Compatible with a Canplas 2" SureSeal trap sealer 132022 • Use approved PVC primer and solvent cement to make PVC Joints
Replacement cleanout lid for a PVC white DWV backwater valve. Used to replace a damaged or lost lid.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at (140F) +60C • Comes complete with o-ring, • Flame Retardant, will not support combustion in the presence of an ignition source
• Hand tighten lid plus a half turn provides a complete seal • A Canplas "Great White" product • Corrosion resistant stainless steel strainer grate • Compatible with a Canplas 2" SureSeal trap sealer 132022 • Use approved PVC primer and solvent cement to make PVC Joints
Replacement flapper for a PVC white DWV backwater valve. Used to replace a damaged or lost flapper. Comes complete with o-ring, .
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV System only • Maximum Service Temperature Rated at (140F) +60C • Comes complete with o-ring, • Flame Retardant, will not support combustion in the presence of an ignition source
• Hand tighten lid plus a half turn provides a complete seal • Hand tighten lid plus a half turn provides a complete seal • Use approved PVC primer and solvent cement to make PVC Joints • Normally used in the drainage portion of the DWV system only • Exclusively from Canplas
Replacement o-ring for an ABS DWV backwater valve access cover or flapper.
Features
• Made of durable neoprene • Normally used in the drainage portion of the DWV System only • Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) • Comes complete with o-ring, • Allows the street sewer gasses to vent through the building vent under normal operating conditions.
• Clear cover allows for easy inspection • Built-in drainage slope 3/4" Fall • Threaded cleanout plug for easy access for cleaning • Can be recessed in-ground with the optional access box. • Exclusively from Canplas