English- Français (French)
No Hub Adapter Cast Iron
Installed in a PVC White 4" Sewer System to adapt a No Hub Elastomer Coupling, sometimes referred to as a "Fernco Coupling" to a DWV Pipe or Spigot. Transition Cement must be used from the PVC to PVC DWV connection.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Use approved transition primer and solvent cement if going from PVC DWV to PVC sewer coupling
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" PVC Sewer No Hub Adapter, Cast Iron (Adapts No Hub Elastomer Coupling to DWV Spigot) H X Spigot.
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
