English- Français (French)
1/4 Bend (90°) HxH
Installed in a PVC White sewer piping system when a 90 degree change of direction is needed from horizontal to vertical or horizontal to horizontal.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Use approved transition primer and solvent cement if going from PVC DWV to PVC sewer coupling
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" PVC WHITE 90 Degree or 1/4 Bend or Elbow H X H
4" PVC WHITE 90 Degree or 1/4 Bend or Elbow H X H
6" PVC WHITE 90 Degree or 1/4 Bend or Elbow H X H
8" PVC WHITE 90 Degree or 1/4 Bend or Elbow H X H
Resources
OTHER TOOLS
1/8 Bend (45°) HxH
Installed in a PVC White sewer piping system when a 45 degree (1/8) change of direction is needed from horizontal to vertical or horizontal to horizontal.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
2" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow H X H
3" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow H X H
4" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow H X H
6" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow H X H
8" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow H X H
Resources
OTHER TOOLS
1/8 Bend (45°) Street SpgxH
Installed in a PVC White sewer piping system when a 45 degree (1/8) change of direction is needed from horizontal to vertical or horizontal to horizontal. A transition fitting that changes the piping system from a Hub to a Spigot end or Piping to a Hub end.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow Spigot X H
4" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow Spigot X H
6" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow Spigot X H
8" PVC WHITE Sewer 45 Degree (1/8) Bend or Elbow Spigot X H
Resources
OTHER TOOLS
1/16 Bend (22 1/2°) HxH
Installed in a PVC White sewer piping system when a 22-1/2 degree (1/16) change of direction is needed from horizontal to vertical or horizontal to horizontal.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" PVC WHITE Sewer 22-1/2 Degree (1/16) Bend or Elbow H X H
4" PVC WHITE Sewer 22-1/2 Degree (1/16) Bend or Elbow H X H
6" PVC WHITE Sewer 22-1/2 Degree (1/16) Bend or Elbow H X H
8" PVC WHITE Sewer 22-1/2 Degree (1/16) Bend or Elbow H X H
Resources
OTHER TOOLS
1/4 Bend (90°) Street SpgxH
Installed in a PVC white sewer piping system to allow for a 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" PVC WHITE Sewer 90 Degree Street Bend or Elbow Spigot X H
6" PVC WHITE Sewer 90 Degree Street Bend or Elbow Spigot X H
8" PVC WHITE Sewer 90 Degree Street Bend or Elbow Spigot X H
Resources
OTHER TOOLS
1/4 Bend (90°) Long Sweep HxH
Installed in a PVC White sewer piping system when a long turn 90 degree change of direction is needed from vertical to horizontal, horizontal to horizontal.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" PVC WHITE Sewer Long Turn Sweep 90 Degree Bend or Elbow H X H
4" PVC WHITE Sewer Long Turn Sweep 90 Degree Bend or Elbow H X H
6" PVC WHITE Sewer Long Turn Sweep 90 Degree Bend or Elbow H X H
8" PVC WHITE Sewer Long Turn Sweep 90 Degree Bend or Elbow H X H
Resources
OTHER TOOLS
1/4 Bend (90°) Street Long Sweep SpgxH
Installed in a PVC white sewer piping system to allow for a long turn 90 degree change of direction from vertical to horizontal or horizontal to vertical. A transition fitting that changes the piping system from a Hub to a Spigot end or Piping to a Hub end.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" PVC WHITE Sewer Long Turn Sweep 90 Degree Street Bend or Elbow Spigot X H
Resources
OTHER TOOLS
1/16 Bend (22 1/2°) Street SpgxH
Installed in a PVC White sewer piping system when a 45 degree (1/8) change of direction is needed from horizontal to vertical or horizontal to horizontal. A transition fitting that changes the piping system from a Hub to a Spigot end or Piping to a Hub end.Features
• Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame Retardant, will not support combustion in the presence of an ignition source
• Maximum Service Temperature Rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Teflon tape is recommended for threaded joints
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" PVC WHITE Sewer 1/16 or 22-1/2 Degree Street Bend or Elbow Spigot X H
4" PVC WHITE Sewer 1/16 or 22-1/2 Degree Street Bend or Elbow Spigot X H
6" PVC WHITE Sewer 1/16 or 22-1/2 Degree Street Bend or Elbow Spigot X H
6" PVC WHITE Sewer 1/16 or 22-1/2 Degree Street Bend or Elbow Spigot X H
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
