Installed behind a urinal and connected to a 2" PVC Gray FR-Pro DWV piping system to provide access to the drainage system and provide a mounting means for the urinal. Mounting bracket allows for a 4", 5-1/2" and 7" bolt spacing adjustment. Comes complete with mounting hardware and installation instructions.
Features
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV system only • Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings • Maximum service temperature rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • The flange is reinforced with a cross • Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Installed in an 3" PVC Gray FR-Pro DWV piping system to provide installation of a water closet to the pipe. An adjustable flange ring provided to ensure that the water closet bolts line up with the closet flange. The 45 Degree adjustment allows the Hub to be directed away from interfering floor joists.
Features
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV system only • Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings • 45 Degree Discharge assists in promoting an increased slope to help waste removal when, using low flow toilets • Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Use approved PVC primer and solvent cement to make PVC Joints • Flame retardant, will not support combustion in the presence of an ignition source • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media