Installed on the roof of a building to drain storm water from the roof to either a storm sewer piping system or the surrounding ground surface.
Features
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV system only • Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings • Maximum service temperature rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Chrome finished components • Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Installed on the roof of a building to drain storm water from the roof to either a 4" storm sewer piping system or the surrounding ground surface. Connects to a 6" pipe Hub.
Features
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV system only • Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings • Maximum service temperature rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Installed on the roof deck of a building to securely fasten the drain to the roof of the building. Studs and washers provided
Features
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC) • Normally used in the drainage portion of the DWV system only • Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings • Maximum service temperature rated at (140F) +60C • Flame Retardant, will not support combustion in the presence of an ignition source
• Uses rust resistant enamel coated bolts • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media