English- Français (French)
Closet Flange, One Piece Plastic - Hub
Installed in a PVC white DWV piping system to provide for the installation of a water closet outlet to a PVC white DWV Drainage Pipe.Features
• Injection molded body in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" PVC WHITE DWV Closet Flange Hub X Flush Fit
4" X 3" PVC WHITE DWV One Piece Closet Flange 4" or 3" Hub or Spigot
4" X 3" PVC WHITE DWV One Piece Closet Flange with fixed slot locations X 3" Hub
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic
Installed in an PVC white DWV piping system to provide installation of a water closet to a PVC DWV Pipe. The flange can be cemented inside a 4" PVC DWV pipe or outside a 3" PVC DWV pipe. Available with a molded or "Easy Out" test plate to prevent debris entering and allow the hydrostatic "Stack Test".Features
• Injection molded body in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" PVC WHITE DWV Closet Flange with Molded Test Plate for 4" or 3" DWV Pipe Hub or Spigot
4" X 3" PVC WHITE DWV One Piece Closet Flange without Pipe Stop 4" or 3" Hub or Spigot
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic Hub End with Gussets
Installed in a PVC white DWV piping system to provide for the installation of a water closet outlet to a 4" PVC white DWV Drainage Pipe. Gussets are provided to add extra strength to the flange.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" PVC WHITE DWV Closet Flange One Piece Hub End with Gussets
Resources
OTHER TOOLS
Closet Flange, One Piece Plastic with Molded Test Plate
Installed in a 3" PVC white DWV piping system to provide installation of a water closet to a 3" PVC white DWV Pipe. A molded Test Plate to prevent debris entering and allow the hydrostatic "Stack Test" to ensure the integrity of the installation.Features
• Injection molded body in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Warning: Canplas Recommends Sponge Rubber and Wax Gaskets Only for use with all Plastic Closet Flanges
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
4" X 3" PVC WHITE DWV Closet Flange with Molded Test Plate X 3" DWV Hub End
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
