Installed in a PVC white DWV piping system to allow for a 1/16 or 22-1/2 Degree change of direction from vertical to horizontal or horizontal to horizontal. A conversion fitting that changes the piping system from a Hub to a Spigot or a Spigot to a Hub termination.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to provide 1/6 or 60 Degree change in direction from vertical to horizontal or horizontal to horizontal.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to allow for a long turn 45 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination or a spigot to a Hub termination.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Injection molded in durable PVC plastic • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to allow for a 45 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC White DWV piping system to allow for a 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a Spigot termination.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to allow for a long turn 45 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. Also known as a 1/8 long turn bend or elbow.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to provide a tight or short 45 degree change in direction where space is a concern. From vertical to horizontal, horizontal to horizontal and horizontal to vertical. Also known as a 1/8 bend or elbow.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to provide 1/16 or 22-1/2 Degree change in direction vertical to horizontal or horizontal to horizontal..
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC White DWV piping system to allow for a 90 degree change of direction from a P-Trap U Bend from vertical to horizontal.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Normally used in the drainage portion of the DWV system only • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC White DWV piping system when a extra long turn 90 degree change of direction is needed from vertical to horizontal, horizontal to horizontal and horizontal to vertical.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • For use in both the drainage and venting sections of the plumbing installation • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to allow for a long turn 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical. A conversion fitting that changes the piping from a Hub to a spigot termination.
Features
• Injection molded body in non-toxic durable white polyvinyl chloride (PVC) • For use in both the drainage and venting sections of the plumbing installation • Service temperature rated at (140F) +60C • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC White DWV piping system to allow for a 90 degree change of direction from vertical to horizontal, horizontal to horizontal and horizontal to vertical.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Normally used in the Vent portion of the DWV system only • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in an 3" PVC White DWV piping system to allow for a 90 degree change of direction from vertical to horizontal or horizontal to vertical. Also provided with a 2" Hub mounted in the low heel of the bend to accept a 2" PVC White DWV pipe or spigot.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • For use in both the drainage and venting sections of the plumbing installation • Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in an 3" PVC White DWV piping system to allow for a 90 degree change of direction from vertical to horizontal or horizontal to vertical. Also provided with a 2" Spigot mounted in the low heel of the bend to accept a 2" PVC White DWV Hub.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • For use in both the drainage and venting sections of the plumbing installation • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC white DWV piping system to provide a long turn 1/6 or 60 Degree change in direction from vertical to horizontal or horizontal to horizontal.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Normally used in the drainage portion of the DWV system only • Flame retardant, will not support combustion in the presence of an ignition source