Installed in a PVC DWV pipe system beneath a bathroom or kitchen sink tail piece. The U-Bend is connected to the Sink Tail Piece using a Adapter sized to match the Tail pipe. The 90 Degree part of the assembly is then cemented to the U-Bend and directed toward the rest of the PVC DWV drainage line.
Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC) • Service temperature rated at (140F) +60C • Normally used in the drainage portion of the DWV system only • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC DWV pipe system beneath a bathroom or kitchen sink tail piece. The U-Bend is connected to the Sink Tail Piece using a Adapter sized to match the Tail pipe. The 90 Degree part of the assembly is then cemented to the U-Bend and directed toward the rest of the PVC DWV drainage line.
Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC) and provided with a reusable watertight gasket • Service temperature rated at (140F) +60C • Normally used in the drainage portion of the DWV system only • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Hand tighten cleanout plug plus a half turn provides a complete seal • Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC DWV pipe system beneath a floor or roof drain. The U-Bend is connected to the fixture Tail Piece using pipe and adapters. It can also be used on a vertical outside pipe vent to prevent debris from entering the venting system.
Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC). • Service temperature rated at (140F) +60C • For use in both the drainage and venting sections of the plumbing installation • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source
Installed in a PVC DWV pipe system beneath a bathroom or kitchen sink to prevent sewer gas from entering a building. The U-Bend is connected to the Sink Tail Piece using an Adapter sized to match the Tail pipe. The 90 Degree part of the assembly is then screwed to the U-Bend and directed toward the rest of the PVC DWV drainage line.
Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) and using a reliable Polyethylene gasket • Service temperature rated at (140F) +60C • Normally used in the drainage portion of the DWV system only • High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media • Use approved PVC primer and solvent cement to make PVC Joints
• Hand tighten cleanout plug plus a half turn provides a complete seal • Flame retardant, will not support combustion in the presence of an ignition source • Flame retardant, will not support combustion in the presence of an ignition source