English- Français (French)
Sanitary Tee HxHxH
Installed in a vertical PVC DWV piping system to allow for a smooth transition from a horizontal branch line to a vertical pipe drainage line.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Flame retardant, will not support combustion in the presence of an ignition source
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
2"X 1-1/2"X 2'' PVC DWV Sanitary Tee H X H X H
2" X 1-1/2" X 1-1/2" PVC DWV Sanitary Tee H X H X H
3" X 3" X 2" PVC DWV Sanitary Tee H X H X H
3" X 3" X 1-1/2" PVC DWV Sanitary Tee H X H X H
4" X 4" X 2" PVC DWV Sanitary Tee H X H X H
4" X 4" X 3" PVC DWV Sanitary Tee H X H X H
6" X 6" X 4" PVC DWV Sanitary Tee H X H X H
1-1/2" PVC DWV Sanitary Tee H x H X H
2" PVC DWV Sanitary Tee H X H X H
3" PVC DWV Sanitary Tee H X H X H
4" PVC DWV Sanitary Tee H X H X H
6" PVC DWV Sanitary Tee H X H X H
Resources
OTHER TOOLS
Sanitary Tee Left Side Inlet HxHxHxH
Installed in a vertical PVC DWV piping system to allow for a smooth transition from a horizontal branch line and a branch line from the left, into the vertical drainage line.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Flame retardant, will not support combustion in the presence of an ignition source
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" X 3" X 3" X 1-1/2" PVC DWV 3" Sanitary Tee with a 1-1/2" Left Hand Side Hub, H X H X H X H
Resources
OTHER TOOLS
Sanitary Tee Right Side Inlet HxHxHxH
Installed in a vertical PVC DWV piping system to allow for a smooth transition from a horizontal branch line and a branch line from the right, into the vertical drainage line.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Flame retardant, will not support combustion in the presence of an ignition source
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" X 3" X 3" X 1-1/2" PVC DWV 3" Sanitary Tee with a 1-1/2" Right Hand Side Hub, H X H X H X H
Resources
OTHER TOOLS
Double Sanitary Tee HxHxHxH
Installed in a vertical PVC DWV piping system to allow for a smooth transition from two horizontal branch lines.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• For use in both the drainage and venting sections of the plumbing installation
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• For use in both the drainage and venting sections of the plumbing installation
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3" X 3" X 2" X 2" PVC DWV Double Sanitary Tee, H X H X H X H
3" PVC DWV Double Sanitary Tee, H X H X H X H
4" PVC DWV Double Sanitary Tee H X H X H X H
2" PVC DWV Double Sanitary Tee H X H X H X H
1-1/2" PVC DWV Double Sanitary Tee H X H X H X H
2" X 1-1/2" X 1-1/2" X 1-1/2" PVC DWV DBL SAN T H X H X H X H
3" X 3" X 1-1/2" X 1-1/2"PVC DWV Double Sanitary Tee H X H X H X H
Resources
OTHER TOOLS
Sanitary Tee Street SpgxHxH
Installed in a PVC DWV vertical drainage system Hub to allow for a smooth horizontal transition from a horizontal branch line into the drainage pipe and a vertical connection to a vent.Features
• Injection molded body in non-toxic durable polyvinyl chloride (PVC)
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• For use in both the drainage and venting sections of the plumbing installation
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
3'' X 3" X 1-1/2" PVC DWV Street Sanitary Tee Spigot X H X H
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
