English- Français (French)
Fitting Trap Adapter
Installed under a sink to transition from the sink drain tale piece to the PVC White DWV P-Trap assembly.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) and using a reliable Polyethylene gasket and PVC nut
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC WHITE DWV Trap Adapter with Polyethylene Washer and Nut Spigot X Slip Connection
1-1/2" PVC WHITE DWV Fitting Trap Adapter, with One - Piece Polyethylene Nut Spigot X Slip
1-1/4" X 1-1/2" PVC WHITE DWV Fitting Trap Adapter, with One - Piece Polyethylene Nut Spigot X Slip
Resources
OTHER TOOLS
Trap Adapter
Installed under a bathroom or kitchen sink to transition from the tubular sink drain tale piece to the PVC white DWV P-Trap assemblyFeatures
• One piece nut and gasket assembly makes installation easier
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) and using a reliable One-Piece Polyethylene nut and gasket
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) and using a reliable One-Piece Polyethylene nut and gasket
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC WHITE DWV Trap Adapter with Washer and Nut H X Slip Connection
1-1/2'' PVC WHITE DWV Trap Adapter with One-Piece Polyethylene Nut H X Slip Connection
1-1/4" X 1-1/2" PVC WHITE DWV Trap Adapter with One-Piece Polyethylene Nut H X Slip Connection
1-1/2" X 1-1/4" PVC WHITE DWV Trap Adapter with Washer and Nut H X Slip Connection
Resources
OTHER TOOLS
Slip Joint Nut
Used as a replacement or repair part for items such as PVC white DWV combination, copper pipe and sanitary tee trap adapters.Features
• Injection molded body in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/4" PVC WHITE DWV Slip Joint Nut
1-1/2" PVC WHITE DWV Slip Joint Nut
Resources
OTHER TOOLS
Fitting Trap Adapter less Washer & Nut HxMPT
Installed in a 1-1/2" PVC white DWV piping system to provide a smooth transition from a 1-1/2" pipe or spigot to a 1-1/2" male national pipe thread (MPT).Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC WHITE DWV Trap Adapter (Fitting Male Adapter) H X Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
Fitting Trap Adapter with Washer & Nut SpgxSlip
Installed under a sink to transition from the Tubular sink drain tale piece, to the PVC White DWV P-Trap assembly.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC) and using a reliable Polyethylene gasket
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" X 1-1/4" PVC WHITE DWV Trap Adapter with Poly Washer and Nut, Spigot X Slip Connection
Resources
OTHER TOOLS
Tray Plug Adapter
Installed in a PVC DWV pipe system beneath a Laundry Tray to connect the Tray to the Drainage system. A Tray Strainer with a gasket, screws thru the Laundry Tray into the adapter. The adapter is then connected to a P-Trap assembly.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Teflon tape is recommended for threaded joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Teflon tape is recommended for threaded joints
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Tray Plug Adapter H X Female National Pipe Thread (FPT)
Resources
OTHER TOOLS
Copper to DWV Pipe Adapter HxSlip
Installed in an ABS DWV piping system to transition from a Copper Pipe to an ABS DWV Pipe.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC WHITE DWV Copper to PVC WHITE DWV Pipe Adapter with Washer and Nut H X Slip
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
