English- Français (French)
Fitting Trap Adapter less Washer & Nut SpgxMPT
Installed in a 1-1/2" PVC DWV piping system to provide a smooth transition from a 1-1/2" Hub to a 1-1/2" male national pipe thread (MPT).Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Teflon tape is recommended for threaded joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Teflon tape is recommended for threaded joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Submittal Sheets
Resources
• Hand tighten plus a half turn provides a complete seal
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Trap Adapter (Fitting Male Adapter) Spigot X Male National Pipe Thread (MPT)
Resources
OTHER TOOLS
Fitting Trap Adapter with Washer & Nut SpgxSlip
Installed under a sink to transition from the sink drain tale piece to the PVC DWV P-Trap assembly.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC) and using a reliable Polyethylene gasket and PVC nut
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Trap Adapter with Polyethylene Washer and Nut Spigot X Slip Connection
1-1/2" X 1-1/4" PVC DWV Trap Adapter with Poly Washer and Nut, Spigot X Slip Connection
Resources
OTHER TOOLS
Trap Adapter with Washer & Nut HxSlip Joint
Installed under a bathroom or kitchen sink to transition from the sink drain tale piece to the PVC DWV P-Trap assembly.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Trap Adapter with Washer and Nut H X Slip Connection
1-1/2" X 1-1/4" PVC DWV Trap Adapter with Washer and Nut H X Slip Connection
Resources
OTHER TOOLS
Copper to DWV Pipe Adapter HxSlip
Installed in an PVC DWV piping system to transition from a Copper Pipe to a PVC DWV Pipe.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC).
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Copper to PVC DWV Pipe Adapter with Washer and Nut H X Slip
1-1/2" X 1-1/4" PVC DWV Copper to PVC DWV Pipe Adapter with gasket and Nut H X Slip
Resources
OTHER TOOLS
Slip Joint Nut
Used as a replacement or repair part for items such as 1-1/2" PVC DWV combination, copper pipe and sanitary tee trap adapters.Features
• Injection molded body in non-toxic durable polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• Flame retardant, will not support combustion in the presence of an ignition source
• Use approved PVC primer and solvent cement to make PVC Joints
• Hand tighten cleanout plug plus a half turn provides a complete seal
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Slip Joint Nut
Resources
OTHER TOOLS
Swivel Tray Plug Adapter with Washer
Installed in a 1-1/2" PVC DWV pipe system beneath a Laundry Tray to connect and transition the 1-1/2" threaded tray strainer basket to the 1-1/2"drainage system.Features
• Injection molded in non-toxic durable polyvinyl chloride (PVC) and using a reliable watertight gasket
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Service temperature rated at (140F) +60C
• Normally used in the drainage portion of the DWV system only
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Flame retardant, will not support combustion in the presence of an ignition source
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" X 1-1/2" PVC DWV Swivel Tray (Strainer) Adapter with Gasket, H X Female Pipe Thread
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
