English- Français (French)
Direct Connect
FR-PRO Kitchen Sink Kit provides a combination of 1-1/2'' fittings for a double sink connection to the drainage system. A 90 Degree adapter connects to one sink a Sanitary Tee (San Tee) to the second and a Dish Washer Wye between the two sinks. The outlet of the San Tee is then connected to the drainage system via a P-TrapFeatures
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC)
• Normally used in the drainage portion of the DWV system only
• Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings
• Maximum service temperature rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Normally used in the drainage portion of the DWV system only
• Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings
• Maximum service temperature rated at (140F) +60C
• High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media
• Flame Retardant, will not support combustion in the presence of an ignition source
• Threaded nuts and gaskets provided for sink connections
Submittal Sheets
Resources
• Threaded nuts and gaskets provided for sink connections
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2'' PVC FR-PRO Gray DWV Kitchen Sink Kit
Resources
OTHER TOOLS
90° Sink Strainer Adapter
Installed in an PVC FR-Pro Gray DWV piping system from a 1-1/2" Sink drain tail pipe using a 90 Degree Trap Adapter, into a 1-1/2" PVC FR-Pro Gray DWV Pipe. Often used in a Pedestal Sink installationFeatures
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC)
• Normally used in the drainage portion of the DWV system only
• Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings
• Maximum service temperature rated at (140F) +60C
• Teflon tape is recommended for threaded joints
• Normally used in the drainage portion of the DWV system only
• Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings
• Maximum service temperature rated at (140F) +60C
• Teflon tape is recommended for threaded joints
• Flame retardant, will not support combustion in the presence of an ignition source
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
Submittal Sheets
Resources
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC FR-Pro Gray DWV 90 Degree Sink Strainer Adapter H X Sink Strainer Adapter Nut and Gasket
Resources
OTHER TOOLS
Sanitary Tee Sink Strainer Adapter
Normally Installed under a 1-1/2" Sink Drain Strainer to provide a Gasketed Threaded connection from the strainer basket Tail Pipe to a 1-1/2" P-Trap. Also allows for a smooth transition from a 1-1/2" horizontal pipe line to a 1-1/2" vertical line.Features
• Injection molded in non-toxic durable low flame and smoke rated Gray polyvinyl chloride (PVC)
• Normally used in the drainage portion of the DWV system only
• Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings
• Maximum service temperature rated at (140F) +60C
• Teflon tape is recommended for threaded joints
• Normally used in the drainage portion of the DWV system only
• Meets flame and smoke requirements of CAN/ULC 102.2, 25/50 for non-combustible buildings
• Maximum service temperature rated at (140F) +60C
• Teflon tape is recommended for threaded joints
• Flame retardant, will not support combustion in the presence of an ignition source
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
Submittal Sheets
Resources
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC FR-Pro Gray DWV San T Sink Strainer Adapter H X H X Sink Strainer Adapter Nut and Washer
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
