English- Français (French)
PVC White Expansion Joints
Installed in a PVC DWV piping system pipe to compensate for expansion and contraction of the system due to temperature changes, building settling or shrinkage in log building structures. To be used in straight pipe runs 30Ft (9.1 m)or longer.Features
• Injection molded in non-toxic durable white polyvinyl chloride (PVC)
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• Service temperature rated at (140F) +60C
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
• The flange is reinforced with a cross rib to prevent
• Approved for Vertical Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Approved for Vertical Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC WHITE DWV Type 1 Expansion Joint, H X H
2" PVC WHITE DWV Type 1 Expansion Joint, H X H
3" PVC WHITE DWV Type 1 Expansion Joint, H X H
4" PVC WHITE DWV Type II Expansion Joint, H X H
Resources
OTHER TOOLS
PVC Grey Expansion Joints
Installed in a PVC DWV piping system pipe to compensate for expansion and contraction of the system due to temperature changes, building settling or shrinkage in log building structures. To be used in straight pipe runs 30Ft (9.1 m)or longer.Features
• Injection molded in durable PVC plastic and provided with a Nitrile Buna Neoprene O-Ring and PQAA Grease #2 Lubricant
• Service temperature rated at (140F) +60C
• For use in both the drainage and venting sections of the plumbing installation in straight runs of 30 Feet or longer
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Type 1 allows for up to 3" (7.6cm) of travel
• Service temperature rated at (140F) +60C
• For use in both the drainage and venting sections of the plumbing installation in straight runs of 30 Feet or longer
• High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
• Type 1 allows for up to 3" (7.6cm) of travel
• Flow direction and proper degree of extension indicated on the Expansion Joint
• Approved for Vertical Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Submittal Sheets
Resources
• Approved for Vertical Installations
• Use approved PVC primer and solvent cement to make PVC Joints
• Flame retardant, will not support combustion in the presence of an ignition source
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" PVC DWV Type 1 Expansion Joint, H X H
1-1/2" PVC DWV Type 1 Expansion Joint, H X Spigot
2" PVC DWV Type 1 Expansion Joint, H X H
2" PVC DWV Type 1 Expansion Joint, H X Spigot
3" PVC DWV Type 1 Expansion Joint, H X H
3" PVC DWV Type 1 Expansion Joint, H X Spigot
4" PVC DWV Type II Expansion Joint, H X H
Resources
OTHER TOOLS
ABS Expansion Joints
Installed in an ABS DWV piping system pipe to compensate for expansion and contraction of the system due to temperature changes, building settling or shrinkage in log building structures. To be used in straight pipe runs 30Ft (9.1 m)or longer.Features
• Hub connections can be single step ABS solvent cemented
• Injection molded in durable ABS plastic and provided with a Nitrile Buna Neoprene O-Ring and PQAA Grease #2 Lubricant
• For use in both the drainage and venting sections of the plumbing installation in straight runs of 30 Feet or longer
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Type 1 allows for up to 3" (7.6cm) of travel
• Injection molded in durable ABS plastic and provided with a Nitrile Buna Neoprene O-Ring and PQAA Grease #2 Lubricant
• For use in both the drainage and venting sections of the plumbing installation in straight runs of 30 Feet or longer
• Service temperature rated at -40 Degrees C (-40 F) to +80C (180F)
• Type 1 allows for up to 3" (7.6cm) of travel
• Flow direction and proper degree of extension indicated on the Expansion Joint
• Approved for Vertical Installations
Submittal Sheets
Resources
• Approved for Vertical Installations
Click on the Part # below to generate the submittal sheet.
Part #
DESCRIPTION
1-1/2" ABS DWV Type 1 Expansion Joint, H X H
1-1/2" ABS DWV Type 1 Expansion Joint, H X Spigot
2" ABS DWV Type 1 Expansion Joint, H X H
2" ABS DWV Type 1 Expansion Joint, H X Spigot
3" ABS DWV Type 1 Expansion Joint, H X H
3" ABS DWV Type 1 Expansion Joint, H X Spigot
4" ABS DWV Type II Expansion Joint, H X H
Resources
OTHER TOOLS
We are always here to help.
Do not hesitate to get in touch for any reason.
